1. The arm span of the robot is 1.8 meters.

2. Matching the servo linkage positioner, it can realize multi-axis linkage and rotate while welding;

3. Equipped with a water-cooled welding gun to prevent the welding gun from generating high temperatures due to continuous welding;

4. Use the teaching programming mode to enter the welding program in advance, and the robot completes the welding work according to the preset program;

5. Workpiece loading and unloading method:
The workpiece is loaded manually, fixed and clamped by quick fixtures, and automatically welded;

6. Welding fixture requirements:
The welding fixture is installed on the worktable, and is mainly composed of a support seat, a rotary clamping cylinder, a compact cylinder, a mounting seat, an adjusting backing plate, a positioning pin, etc.

7. Requirements for welding workpieces:
※The surface of the workpiece must not have oil rust and moisture that affect the welding quality;
※ There must be no sagging and burrs that affect positioning;
※For MAG and MIG welding processes: the gap at the welding track must be less than or equal to the diameter of the welding wire, and the joint gap for fillet welds should not be greater than 1.2mm;