1.Can ST-FL80F be manually loaded?

The new economic model may have a manual solution, but the standard ST-FL80F is not supported

2.Ignoring the loading, can ST-FL80F cut angle steel, H-shaped profile, and U-shaped profile?

Ignoring the loading, ST-FL80F can cut special shaped profiles, but this involves the problem of the loading system, ST-FL80F standard configuration does not support.

3.Can ST-FL80F be equipped with a protective device on the roller system?

Safety measures can be installed, such as protective covers, etc., without affecting maintenance

4.In addition to Chinese and English, can ST-FL80F support other languages?

Supporting Japanese, Korean, German, Spanish, Russian, French, Portuguese, Italian, Thai, just need to translate the corresponding language, then import into the system.

5.How long can the shortest and longest be cut?

Standard 1000-2000mm, a supporting material device can be added for more than 2.5 meters, and it can be cut to 6 meters.

6.How and what needs to be maintained, how often, which areas need lubrication, what kind of oil needs to be used and so on?

Basically, just need to keep the machine clean & tidy by removing the dust & scraps around the machine, so as to keep frequent operation.

In addition, there are 2 parts need to fill lubricating oil (feed to laser cutting components and loading components).

Just check if there is enough oil in these two boxes every shift before starting the machine.

The oil is JIS K2213 or ISO Vg32 or at the same level, specially for lubricate pneumatic parts.

It is easy to find at the market.

One more part needs to brush butter is the feeding roller device, brushing frequency depends on using condition. Don’t have to brush frequently.

7.How clean the steel tubes must be in order to work with the laser cutting machine?

For most of our customers who are cutting steel pipes, their pipes have oil on it, the main purpose is to prevent rust. So far, the cutting is good; no customer has said that this affects the cutting.